Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Early B&W and Projection TV (http://www.videokarma.org/forumdisplay.php?f=19)
-   -   1956(?) DuMont (http://www.videokarma.org/showthread.php?t=253735)

Bogframe 03-14-2012 12:39 PM

1956(?) DuMont
 
1 Attachment(s)
I've been scanning, archiving and restoring slides my dad took between the 50s and 60s. I came across this one, taken in 1960 of our living room, featuring the DuMont TV my parents got as a wedding present around 1956.

http://www.videokarma.org/attachment...1&d=1331746702

I wish I still had the TV, or at least knew the model number.

jr_tech 03-14-2012 12:50 PM

1956?
http://tvhistory.tv/1956-Dumont-RA356.JPG

Or perhaps 1958?

http://tvhistory.tv/1958-Dumont-RA400.JPG

Nice picture... do you have to color correct much from the old slides?

jr

PS: the DuMont 1956 brochure. also from the tvhistory site:

http://tvhistory.tv/1956-Dumont-Brochure.JPG

old_coot88 03-14-2012 12:54 PM

Our store which carried the DuMont/Emerson line (along with RCA) sold that model. It had option for UHF which could be installed by the dealer. I gave one to my mother, the exact model shown in your pic. Seems like '58 0r '59 though.

Bogframe 03-14-2012 02:03 PM

1 Attachment(s)
They could well have gotten it in 58 or 59 for all I know, Mom doesn't remember. I had to do quite a bit of tweaking on that slide, it had shifted a lot toward magenta, but I do photo restoration for a living, so I know a few good tweaks.

Here's a before and after:

http://www.videokarma.org/attachment...1&d=1331753228

old_coot88 03-14-2012 02:28 PM

The one of which i spoke had a nice real wood cabinet with mohogany finish. Looked just like the one in the pic, even to the removable legs to make it a table model.

jr_tech 03-14-2012 02:39 PM

Quote:

Originally Posted by Bogframe (Post 3029736)
I had to do quite a bit of tweaking on that slide, it had shifted a lot toward magenta, but I do photo restoration for a living, so I know a few good tweaks.

Here's a before and after:

WOW! good job! :thmbsp:

jr

Bogframe 03-14-2012 02:52 PM

Quote:

Originally Posted by old_coot88 (Post 3029739)
The one of which i spoke had a nice real wood cabinet with mohogany finish. Looked just like the one in the pic, even to the removable legs to make it a table model.

This one had a maple finish, but I could kick myself for getting rid of it back in 1979. The picture tube had gone dim, and I didn't think it could be repaired.

Quote:

Originally Posted by jr_tech (Post 3029740)
WOW! good job! :thmbsp:

jr

Thanks!

Sandy G 03-14-2012 03:43 PM

Quote:

Originally Posted by jr_tech (Post 3029740)
WOW! good job! :thmbsp:

jr

Boy-Hidee ! Ain't THAT th' Truth !

old_coot88 03-14-2012 05:42 PM

Watched the Christmas eve Apollo 8 trip around the moon on that set at my mom's place.

Bogframe 03-14-2012 06:20 PM

I watched JFK's funeral on it when I was the same age as John-John.

Dave A 03-14-2012 08:33 PM

Bog,

How about a simple primer on your restoration? Dad's slides are standing by for scanning.

New post for this would be best if allowed.

Bogframe 03-15-2012 07:26 AM

Quote:

Originally Posted by Dave A (Post 3029760)
Bog,

How about a simple primer on your restoration? Dad's slides are standing by for scanning.

New post for this would be best if allowed.

1. Take two semesters of Photoshop classes so you can know all the intricacies of the program.

2. Upgrade your computer so it has a minimum of 4GB of RAM, get a second hard drive of at least 2TB with 500GB sectored as a scratch disc for Photoshop. You'll need the space, a 35mm slide scanned at 6400 dpi runs around 140MB.

3. Get a top of the line scanner (I use an Epson Perfection V700 now, upgraded from the V500) and learn THAT software inside and out.

4. If you're archiving, scan the slides at around 6400dpi. This will make sure that the pixels are smaller than the grain, and it will also make sure you won't have to scan them again for a long time after technology improves. It takes an average of 7 minutes to scan a slide at that resolution,so be sure you have the time to spend.

wa2ise 03-15-2012 09:06 AM

Quote:

Originally Posted by Bogframe (Post 3029736)

Wow, I wouldn't have thought that there was any color information in the before image. Looks like a color tinted black and white picture.

Bogframe 03-15-2012 01:07 PM

Most of the 50s-early 60s Ektachromes look like that. It's not that they got redder, it's that the Cyans and Yellows faded, but if there's any information left there, it can be brought out with a lot of work and patience.

Rinehart 03-17-2012 12:27 AM

Did you crop this picture at all, or was the original like that? I ask because it's beautifully composed, and that diffuse lighting is gorgeous.


All times are GMT -5. The time now is 05:11 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.