Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Early B&W and Projection TV (http://www.videokarma.org/forumdisplay.php?f=19)
-   -   GE Locomotive Schematic (http://www.videokarma.org/showthread.php?t=90619)

Konrad Schiecke 11-29-2006 01:47 PM

GE Locomotive Schematic
 
Hi: Does anybody have a scan/pdf or jpg of the schematic for a GE Locomotive TV that they could e-mail me?

Thank you, Konrad

N9ZQA 11-29-2006 04:27 PM

Konrad -

I'll have to look, but I think I have the Photofact in .pdf for that set at home. I've got it's 12" brother - same chassis IIRC.

Jim

N9ZQA 11-30-2006 07:44 AM

Konrad -

I don't have that one in a .pdf as I originally thought. I've got a photocopy of it. I can scan it in this evening and send it to you. Let me know if you'd still like it.

Jim

Konrad Schiecke 11-30-2006 07:49 AM

GE locomotive Schematic
 
Thanks Jim,The photocopywill give me a start.
Konrad

N9ZQA 12-01-2006 12:00 AM

Konrad -

Schematic is available at http://putstuff.putfile.com/18442/5296312

There are three pages in the file; let me know if you need any of the other service information. This schematic is for models 10T1-10T6; I hope this helps you out.

Jim

Konrad Schiecke 12-01-2006 11:30 AM

GE Locomotive Schematic
 
Jim: I got your files.thank you.If you have the voltage reference page that would also be a help. The schematic brought back memories when I was servicing sets in the mid 50's. The biggest complaint on the GE sets was :the set is dead and the house smells like rotton eggs. The ten man staff in the shop i worked all carried sellimum rectifiers in their tube caddys. That issue was an in house repair and was not to be brought into the shop. The second biggest complaint was a shop job and had to do with bad flybacks. The good old days!!!
Thanks again,
Konrad

N9ZQA 12-02-2006 09:26 AM

Konrad -

Here is the voltage and resistance page:

http://putstuff.putfile.com/18909/1060567

Let me know if you need anything else.

Jim


All times are GMT -5. The time now is 04:17 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.