Quote:
Originally Posted by wa2ise
Usually color TV sets use a delay line on the luma signal, to compensate for the delay of teh chroma demod circuits. If that delay line doesn't have a proper termination resistance load, it could cause an echo (ghost).
|
Quote:
Originally Posted by old_tv_nut
Yes, looks like a delay line problem - check the delay line ground as well as resistor values in the video amp circuits.
|
Thank you for the tips. I will check the delay line and associated circuitry when I get back into the set. I will be happy if I can get it looking nearly as good as Bob's picture.