|
Wayne:
Here's something to try for the blue convergence pot. Get a 200 ohm pot (Nebraska Surplus sales has several types) and put a 50 or so ohm resistor in series with a 150 ohm resistor and connect the ends to the outside terminals on the 200 ohm pot. This will make the overall resistance 100 ohms with a centertap at the junction of the two resistors. You will have to mount it somewhere else on the chassis or perhaps you could find a pot that can replace 100 ohm section in the dual section in the set now.
Steve
Last edited by Steve K; 03-08-2009 at 07:02 PM.
Reason: math error
|