[sampson159]

nice zenith.that is not convergence causing your issue.it is in the demod coils.you may have to adjust them to get a good color saturation.i have a zenith with the same chassis.it had a similiar problem.the alignment of the color.just a slight turn of the coil and it is fixed.dont force it and never use a metal tool!!i know some of these guys will scream because of not using a signal generator but a slight turn should get it right.try to get something red on the screen such as a banner or shirt,etc.turn the coil until the red is fully saturating the image.a dvd or a fixed image so you can work.the coils are right beside your demod tubes.there is also a coil near the transformer that will need to be adjusted.good luck on this.