|
CTC16XL
termites did a number on it, I cut off the bottom where the worst of the damage was (with the live termites in it.
I will have to leave it intact for a while, maybe bag it and fill with propane?
Of course removing the back resulted in one lost screw that fell some where on the chassis.... I have tried turning it over and on its side, but nothing is coming loose. It fell over by the HV cage. I was gentle on the turning over so as not to bang it around.
I was going to pull the HOT, put it on a variac and measure the current to see if there was a chance the can caps are not shorted. ramp up slow of course.
|