|
ok I pulled out the top magnet (blue) and turned it 180 and reinserted, that gave me much better horz blue control on the board. Got the best all white grid pattern yet (and the over the air stuff looks great)
Now I just have to deal with the vert height. if I adj for correct lineairity I come up about 1" short on both the bottom and the top. I if I increase the height adj, then I cant adj the linearity. its like I cant make the circle wide enough to fill out the screen without it becoming a tall oval.
the raster fills out the screen horz, just the image does not get wide enough to match the height, if that make since.
I am using a indian head to do this. Mostly I get a tall skinny circle, again unless I back down the vert, then I can adj lineairity for a nice round circle.
I am going to pickup some new tubes tomorrow vert and horz sweep.
I still have not recapped the filter caps...
Last edited by DaveWM; 10-30-2009 at 10:08 PM.
|