Quote:
Originally Posted by radiotvnut
This is a common problem on those sets. Remove the modules, clean, and resolder the connections on the module. On the video output module, resolder the resistor pack and video output transistors. The luminance module will also have a resistor pack that needs to be resoldered.
|
When you say resolder the connections, do you mean all of the components on each board? Also, do I remove the old solder or just reheat it and let it cool?
The video ouput module is about 6 months old, but I guess sitting around for 30 years could have caused issues with the solder points.
Another quick question (I hope)... How much is involved with correcting the overscan? I lose about 1 1/2" or more on all sides and think this is a bit too much. That seems a bit much for a 19" set, but I could be wrong.
Thanks!
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|