Quote:
Originally Posted by polyphase
I have to agree with this. A 250Hz tone has a wavelength of about 4ft, so at least a partial acoustic short circuit would exist here, right in the critical lower midrange. 100Hz material, if deliverable from this set (I suspect it is), would pretty much be cancelled out.
|
I'll definitely do a comparison with and without once I get it running.
Quote:
Originally Posted by Reece
It would appear that the 8035-D is wired correctly with the mounting lug being the ground end of the .00011 mfd. cap.
|
Yeah, I followed the schematic so it should be OK.
Speaking of schematics, I couldn't find this gooey looking thing on mine. I did a little research and discovered that it's a wavetrap added to later revisions. The bubbling goo appears to be old wax.
Here's the rebuilt metal box cap.
Call me crazy, but I don't like rust. So, I unmounted the power transformer and removed the clamshell covers.
Then, I removed the rust and sanded them a bit.
Here they are after some primer. Next up, some black enamel.
