Quote:
Originally Posted by JCFitz
It's 1 and 3/4 in diameter and 2 and 9/16 from screwhole to screwhole and the same from front to back.It takes an octal tube such as the 1B3.
The socket itself is a separate piece from the actual cup but it was glued in place during manufacture.
Thanks!!
|
I measured my socket. It is a bit bigger: 3 3/8" screw hole to screw hole and 2 5/8" diameter. It has an octal socket and a corona ring holds the socket in place with solder (as originally manufactured).
Would this fit?