|
got it. At first the horz was way off, would lock on 3 images. It ended up just needing the horz transformer bottom slug needing to be adj A LOT which surprised me. I checked the sync sep pulse with a freq couner and it looked good (15750 or there abouts) but the drive signal to the HOT was 125750. I adj the bottom slug to note which direction would speed up the osc, several turns out did the trick so now it has a rock solid sync.
The voltage divider resistor then shorted out to the frame, I was able to stick a piece of cardboard in there to temp stop that, and the 850 section opened up as well (same section where the short was) so I will have to order up some power resistors to complete it. will need to figure out a neat method for insalling them, I like to keep all the parts in the same location (like stuffing can caps) but the power resistor will be a challenge.
|