It looks to have a 4-pin DC plug on the back and a VTR/CCU connector for probably a 3/4" deck given it's age. The Sony DC format uses pins 1 and 4 for DC. Not sure about Ikegami. Any Sony DC adaptor from the day will do. Check the +/- connections for 1 and 4. It should operate as a free-standing cam with a DC supply. Probably an "industrial" cam given that it has saticons. Bcst would have plumbicons and be in the HL-xx series.
I found this Flickr photo of the back end but could not copy it for here.
http://www.flickr.com/photos/zog/379...n/photostream/
__________________
“Once you eliminate the impossible...whatever remains, no matter how improbable, must be the truth." Sherlock Holmes.
|