|
Before I start in the ctc-15 I would like to work some things out on this chassis.
Could someone ohm their degauss coils ?
I haven't done any more adj on the purity or convergence since the crt needs a catarac job and will have to come out.
I wanted to see if I could the chassis right.
I the picture there is a black line between Brian and Stewie that runs top to bottom
half way down you can see it bends. It starts from the top to the bottom.
The whole picture does this slowly.
It does this on the test jig as well.
I swapped HOT and damper tubes and checked my work when I replaced the lytics.
|