|
Under the heading of not leaving well enough alone, I was thinking about the horz eff coil setting last nite. the fact that the dip took place with a large bit of the slug out of the coil (I did drive it down it never got better) I got to thinking maybe one of the 3 caps that connect across the coil may be bad. I checked the .0022 that connect directly across it on the board, but I never checked the two .068 that are connected below the chassis. So even though I have it all back together I think I must pull it out again and check those. I generally just clip on lead, test, and then use a pig tail to reconnect if ok.
|