|
It's in the instructions, but just to underscore that the cabinets, both for removal and installation of the tube and neck componets, should be face down on a padded surface. In the case of the Wingate, best to remove the 4 door pulls first. If you can get some help w/tipping the cabinets on their face, will make the job easier.Of course the chassis & tuner all knobs have to be removed before attempting any pix tube removal. As was stated, take lots of photos before hand of all connections, don't forget the speaker connections, and where things are bolted/screwed to the cabinet. When lifting the pix tube out have a safe level place to set it down already picked out. Wear safety goggles & gloves if you feel it's necessary.
Take your time and good luck with this project.
-Steve D.
|