|
That looks like a 10" CRT from here, just measure across it, if it's close to 10" then it has to be one.
There may have been a 12" version of this set because I know there were a couple versions.
If it's a 10 then I believe the actual correct CRT for these is the 10KP4 Aluminized tube but of course a 10BP4 would work fine.
Here's a picture of one of the small knobs, they all look the same.
The HV Cage on these was made of Fish Paper I think, that's why most of them are missing.
Mine has the back but it's not in a position where I can easily take a picture of it, it isn't a flat back though, it bulges out about an inch at the edges.
|