|
One of the caps in the feed back loop on the vert board a .0039 had the fuzzy eye syndrome, the others tested ok, but the are all replaced and with 1.6 to 2 kv caps now. there was a 1.2 meg resistor that had been replaced, again on the grid circuit of the vert osc. I checked the schematic AND the other CTC-5 and both had a 1 meg there so I went a head and replaced it as well. The 6.8meg in series with the vert hold pot is over 8meg and its a 5%. I need to check my stash of resistors. I also need to check the pot while that resistor is out of the circuit.
|