View Single Post
  #9  
Old 10-24-2012, 03:27 PM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,697
Quote:
Originally Posted by ctc17 View Post
Ok first forget the clone crap, thats something the super elite do so they have spare parts.

Whats the model number, its going to be something like 528.555555 and it will be on the back.

It may not be a clone at all, it may be a spinoff...how about that?

We need to start with the right model number and schematic and stop telling the tv what it is.
ok the chassis dont have a number on it but could use this number from the sams which is this chassis, 528.61110 hope this helps. and as far as this bias problem i had read a thread here on karma about this resistor from pin 2 of the blanker tube to ground and yes it was said that it started with the 15 chassis but no one knew if possibly it went for the 12 unless the sams was looked at for the 12 and it shows just that resistor in the very spot from the 12 to 16 chassis and there is no 1.5 meg resistor that i found on the 12.
Reply With Quote