Quote:
|
Originally Posted by ;
If that jumper is missing, put it back as soon as possible to restore the regulation. If your HV goes too high, the CRT neck may shear off.
|
HAHAHA its not a 70s Zenith, its a silvertone roundie that can hardly produce 24kv when hit by lightning.
Quote:
Originally Posted by timmy
did the grey scale so many times now and it improves nothing. the thing with the drives,rgb i cannot get the rgb lines across the screen unless i raise the bias alittle then i put the service switch back to normal and then i have to lower the bias because its all bloomed. this is the only way to see the color line in the setup, nothing in the sams about bias at least that i remember. the strange thing is i can leave the rgb drives ccw and still have good color.
|
Check the video output and voltages on the crt. I have a feeling something is being overdriven.