|
Thanks Sandy I'll do my best. I will go in the morning to do the test.
My B&K 465 tester calls for a setting of 6.3v for the filament and a g1 setting of 40. I'm using the settings for a 21FJP22 as suggested by Dave base on tubes of that size and shape.
It would appear that my tester is only testing one thing in the CRT. Will the results from that test be enough to determine that the CRT is good? I know there are three guns in a color CRT shouldn't they all be tested individually? Is it possible to get a good emissions reading from my B&K 465 and still have a bad CRT?
Last edited by charokeeroad; 02-13-2013 at 06:30 PM.
|