|
I started using my sucker but it wasn't doing the trick so I used the wick. I kept doing it a little at a time to try to keep the board from getting too hot. Actually the circuit board was in good shape. I've worked on much worse. Only a tube or two had been changed. All original parts. It looks like it has low mileage. Under the HV cage looked as new, even all the wax was on the fly and not even cracked.
Yes, I did the sweep chassis and PS first. The first set of photos was after that.
Last edited by ggregg; 02-15-2013 at 10:35 PM.
|