View Single Post
  #2  
Old 02-28-2013, 09:00 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
the chassis only has a little bit of surface rust on the back corner near the HOT.

All the tube shields were badly rusted, and the shield on the tuner was also badly rusted. Lastly the fly cage was a mess. Very few papers, so should be an easy recap to get to a test run stage. I will replace the top hat that had a rusted off lead, check the B+ for shorts and if ok will try a slow start with the HOT and VOT pulled.

Last edited by DaveWM; 02-28-2013 at 09:47 PM.
Reply With Quote