|
the recap is done, the filters were ESRed, formed up and leakage tested. This is the second little Moto that the electrolytics are fine. When I variaced it up I was greeted by a 1/2 inch long line jumping from top to bottom. Two hours later I traced it to a broken wire very well tucked under a terminal strip that it didn't even go to. It was from the vertical oscillator plate to the output.
Put the wire where it was supposed to go to, hooked the chassis back up and a picture!!! Noisey and neither centering control works, all other controls are touchy but it's eyes are open. For what was the second worse basket case in my closet, it has come a LONG way.
Pictures Monday AM!
This one even has the metal can ballast that still is good! (That's why the variac turn on).
The worst basket case I have a bakelite cabinet that someone modeling clayed the CRT into place. It's chassis is a real mess also!
|