|
after a considerable about of futzing with it, I decided to return the tap to the orig spot, this will boost the overall voltage, which should help the CRT as its only ok. I will leave the screen dropping resistor in place. I think this will get me to about 195-200ma and temps in the 120-140 range once the fly cage is closed back up. the only other thing I did after the screen and those couple of plate load resistors and the coupling cap for the HO tube as to replace the .47 filter cap on the AGC, the old one way cracked around the terminals, not sure how that happened, but I figured it may have compromised the seal.
I plan to try a new lin coil in it at some point to see if that has any effect but that will be a later day. I really want to get back on that CTC-7AA
|