Quote:
Originally Posted by Kevin Kuehn
The metal back on my CTC-7 Anderson measures .05" thick. Holes are .189" dia. If I can find some large paper I'll trace the outside edges and a sampling of the hole spacing. NO way am I going to trace all those holes.  If you were closer by I'd sell you the whole set for parts very reasonable. Unfortunatly someone necked the CRT before I got it. Original owner was storing the set with the back off. |
I replaced a necked CYP with an FBP in 1975, and have never had an issue with the anode arcing to the shield. I've still got it, and it's working fine with no rebuild, yet.
I'm working on my CTC-7, slowly....