|
I used those resistors with the cooling fins on them rated at about twice the wattage as the originals. I would think that would last. If I had done capacitors, I figure I would have had to use non-polar electrolytics, about 50uF for the 51 ohm and 330uF for the 8 ohm.
I do have a B&K analyst, but it needs work. If anyone has schematics for the 1075 let me know, I've yet to find one.
I swapped the fly, and I was fairly certain that was the problem. (The wet sawdust it was sitting in, the fact that it looked dried out and that so much of the wax had melted off had convinced me of it.) I'm leaving the new one in there for good. But now I'm fairly certain the arcing I'm hearing is in the yoke. So now, I'm looking for one of the following:
Halldorson y52
Thordarson y52
Ram y110
Stancor dy27a
Triad y60, nw23, yc110, yc1, cl1
|