View Single Post
  #9  
Old 03-07-2015, 11:55 AM
hi_volt's Avatar
hi_volt hi_volt is offline
Vintage TV and Radio Nut
 
Join Date: Dec 2011
Location: Tucson, AZ
Posts: 1,144
Some progress on the Zenith porthole combo. I had a chance to do some partial disassembly and clean-up. The set was pretty dirty from sitting around for who knows how many years, but the packrat damage wasn't as bad as I was expecting. There are only a couple of wires on the underside of the TV chassis that have had the insulation nibbled upon (easy repairs) and a few spots on the cabinet that I should be able to fix with some wood putty. Both the tuner and TV need to have the dial cords re-strung. The tuner chassis is in real good shape, and the TV chassis will need some general clean-up (and obviously electrical restoration), but I think it will turn out pretty good. Need to remove the record player and escutcheons, and then I can begin the cabinet restoration. I always try to save the original finish if I can, but I think this one is going to need a full strip-down and re-do. It looks like, with a little care and careful cleaning, I should be able to save the original grille cloth. Here are some pictures of where I'm at so far.
Attached Images
File Type: jpg 001 resized.jpg (63.0 KB, 17 views)
File Type: jpg 002 resized.jpg (54.8 KB, 13 views)
File Type: jpg 003 resized.jpg (62.2 KB, 20 views)
File Type: jpg 004 resized.jpg (60.0 KB, 13 views)
File Type: jpg 005 resized.jpg (65.8 KB, 22 views)
Reply With Quote