[whatadish]

no notes...he called me a couple times telling me he could fix it with a hammer. all the plastic dials were broken into pieces. A few caps were hooked into place because he said they were the wrong values. He replaced K7 but it is an old nos. Pin 6 of the k7 shows correct voltage, not sure if I trust an old nos one. Thx Jim for the pm, if anyone needs any bulk copying done i own a small copier company. I will stick the hot back in and do a quick check. Does the crt and yoke need to be connected...they were for my 6cg7 reads. Don't want to damage the crt as it looks and tests new. I did retest the hot and it is still quite strong.