Quote:
Originally Posted by bandersen
I don't bother adding resistors. Were only talking a few volts difference. If you really want to then you can simply increase the 37 ohm resistor to something like 82-100 ohms. Keep in mind it will run hotter.
|
So you just switch the seleniums over to diodes and live with the voltage increase? Some people scream and yell about making sure you add or increase the resistance after replacing the seleniums. Is the VT-71 different than other sets and only has a minor voltage increase when installing diodes? Or have I just been too tuned in to the "SCREAMERS?"
