Quote:
Originally Posted by SwizzyMan
Well I hooked up the leader to my flatscreen and my 8-pt-7032T and there were no issues whatsoever. But I guess I should try replacing some resistors maybe or just replace everything in the vertical board?
|
def do NOT replace everything on the vert board until you have tried the adjustments AND tube swapping.
Yes you may need to replace some parts, but best to do one thing at a time with starting with the least invasive.
If that does not work then you want to look at the type of cap, not all are prone to failure. Resistors have to be way off before you start getting issues. I rarely find them to be the issue EXCEPT the plate load resistor that are connected to the boost voltage in the vert. since this is your 1st set IF it comes to that, you should only replace one or two parts at a time. there are a couple in the osc circuit that can be critical, but generally only need to be deal with if the adjustment pots can not bring into working range.