Quote:
Originally Posted by DaveWM
def do NOT replace everything on the vert board until you have tried the adjustments AND tube swapping.
Yes you may need to replace some parts, but best to do one thing at a time with starting with the least invasive.
If that does not work then you want to look at the type of cap, not all are prone to failure. Resistors have to be way off before you start getting issues. I rarely find them to be the issue EXCEPT the plate load resistor that are connected to the boost voltage in the vert. since this is your 1st set IF it comes to that, you should only replace one or two parts at a time.
|
well I did replace all the browndrops and one HV cap on the vert and I replaced both 6aq5a's with their military counterpart 9005. But it was a lot worse before I recapped.
__________________
Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
|