|
what does it mean hold is not great, is it critical, does it do it on all signals or just the generator
Its hard to remotely diagonose an issue unless you either post up videos OR give very detailed descriptions of the problem.
IF for example its critical (very narrow range of horz hold with flopping both ways on either side of hold, then I would look to the resistor that is across the hold coil as maybe going high in value. If it just loses sync and is not critical then I would think its the horz osc or the sync sep (but can be readjusted and be not critical again).
Maybe another poster can step in for a while and offer some other insight based on what you are describing.
|