[SwizzyMan]

Good news!! Got a raster and picture finally! Was an adjustment of the ion trap. The picture is lacking vertical height,lack of focus,and the vertical and horizontal holds are pretty bad and barely lock at all and dont lock for long. I also noticed that a small little portion of the h out tube plate is glowing red. It is concentrated in the middle of the plate on two sides and is a small dot. Picture is nice and bright. I did a full recap of all the paper caps in the TV and some off value resistors. I have not replaced the filter caps on the TV but none of the caps are getting warm but one does get a bit hotter than room temp which is part of the vertical sweep. Any suggestions on where to go from here? I would assume restuffing the filter caps would be a good idea.