|
I would find it strange for the fb to be destroyed from a short use with one of the
shape coil not properly adjusted. I would put more stock into either there is
something wrong with the part, as your resistance readings possibly indicate, or,
too much current through it.... Was Horiz Output Tube cathode current within spec..?
Also, if the resistance was off, I would imagine cathode current would also be off....
If you can pull off a fix for the arcing, I would check cathode current, and the grid
voltage, too far positive and it's going to gobble up too much current. And look
at the shape of it signal, no dc leaking in either....
So is that flyback completely unavailable....?
Good Luck !
.
__________________
Yes you can call me "Squirrel boy"
|