|
Tom C. thank you for clearing up my comment from post #50. I do better in face to face conversion, again thanks. Now if you loose the focus network in your CTC-4 use a 25 meg or maybe 50 meg focus pot from the control pin to ground and move the focus lead to focus pin on a tripler with the divider network built in, with a ECG500A use a focus control network from a CTC63 or CTC66 instead it has the top and bottom resisters built in. All the best, Tom
Last edited by tom.j.fla; 06-30-2016 at 09:22 PM.
|