|
V11 pin 5 measured from pin4 of v10 measures 232vdc but the SAMs says 70vdc and I cannot get an accurate voltage reading on pins 2 and 5 of the 6sl7 with a digital vom. And v13 pin 2 shows 20k or 520 ohms but it measures 2.2 k this set is going to drive me to drink, omg lol.. Any help out there? I'm also using a glass ballast and tried a ballast made up of resistors.
Last edited by timmy; 03-10-2017 at 04:51 PM.
|