Quote:
Originally Posted by old_tv_nut
The 4.7 is 4.7 microfarads, right? The + side should be connected to the transistor base.
You are going into pin 4 (grid) of V4 (6AC7), right? Did you disconnect the detector diode?
|
Yes to all questions. 4.7 mfd electrolytic with + going to base.
Quote:
Originally Posted by old_tv_nut
Since 5.6 k is close to your collector load, it will reduce the AC gain, so disconnect it and replace it with something like 56k.
|
There is no 5.6K resistor in the schematic supplied by vts1134. Do you mean R23 in the RA-102 schematic, the 5.6K connected to pin 4 of the 6AC7?
Thanks much for the various suggestions. I will tinker some more and report back (possibly tomorrow).
Phil Nelson