Quote:
Originally Posted by old_tv_nut
Suggestions:
1) make sure the value isn't off by a decimal place or something
2) check for open resistor in parallel with either L72 and/or L71
If it's not those, check all other parallel L-R combos in the video amp chain.
|
Value is fine. Checked all coils and resistors that may be in parallel with them and they all check fine except for a coil on the B-Y amp that reads 1.2 meg, but I dont think that one really matters for my current problem. I hope its not the delay line causing this!
__________________
Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
Last edited by SwizzyMan; 08-19-2017 at 08:05 PM.
|