|
I have the winding machine here now. I did a test wind of one layer, 333 turns of 41AWG wire and it turned out very well. Now I'm waiting for the Kapton tape to get here. The machine did the 333 turns in well under a minute. I'm going to try the winding data I calculated for the Westinghouse part since it uses only 41AWG wire and see how it measures as far as winding resistance. It should not take a whole lot of time to wind the transformer with this machine.
If all goes well I will order some 43AWG wire and try to do the CT100 winding data as well. 43AWG wire is more expensive than the thicker, more usual gauges.
__________________
Erich Loepke
|