Quote:
Originally Posted by Yamamaya42
ummm, is this a problem, i really hope not, cause if it is, I'm screwed.
https://imgur.com/x1izfje
between point 2 -3 I get 250 ohm on a DVM but from 1 - 2 it's 95.6 ohms.
is the FBT bad ? T_T |
What I would do is see if there's an alternate schematic of the TV, like a SAMS or Riders to be sure it's not a mistake. Otherwise, it looks like you have some adjacent turns shorted.
A ringer would show that, as would something like a B&K analyst or Sencore VA48 etc. that would drive the flyback directly.
John
EDIT: that looks a lot like a 630, and that looks like RCA's drawing... If it's a clone, then RCA also has 180 ohms for that part of the winding.