Quote:
Originally Posted by Yamamaya42
well. the 6.75k resistor is definitely testing too low, by almost 1 k out of circuit, it's a 3 resistor thingy stuck in 1 pack, the other 2 check fine 12 & 93 ohms.
i got new ones coming Tue, and will replace the 6.75k first and see what happens.
|
Changing that one first is fine.
It's easier for me to follow these power supply voltages using the Riders schematic I posted here.
https://www.flickr.com/photos/152661...7713086856613/
[edit] So if your 6.75k is part of a candohm, it's possible that part of it's winding is shorting to ground by insulation breakdown. If that's the case you'll be much further ahead by replacing all three sections. Otherwise it would be unusual for a resistor to drift down in value.