I just closely checked the coils I removed from the set, the 2 120uh coils, L22, L20 (wrapped around a 22k res) seemed to compare mostly OK to to new ones, but today, when removed the wax from them so I can open the coil on one end to measure the resistor, the core resistor from L20 tested at 52k and L22 at 31k.
At this point, I have only replaced 4 out of 6 coils, for video amp and output, have not touched video det yet, which has a 180uh coil around a 39k, this one most likely has also drifted up.
