While I'm waiting for the vert Osc x-former from ETF, I have noticed that some of the power resistors are running a bit warm, they are not smoking or anything, so I guess its OK.
https://i.imgur.com/p8TwMpx.jpg
R122, which was the candohm resistor, rated at 20w, now a 25w, still very hot, and R123, was a 5w sand resistor, was getting very hot, disintegrating, green leads, new ohmite 5w in there, still getting very hot. Gonna put in a 10w
electrolytic capacitors are new.
The 145v goes mainly to the video IF , no shorts found, and when I pull the IF tubes, the heating stops, so I guess this is normal...