Quote:
Originally Posted by Ed in Tx
While playing back a tape try tapping on the relays with a toothbrush handle or small screwdriver handle. You may hear a change or even proper audio.
I've cleaned and made relays work at least temporarily with a piece of thick paper wet with Deoxit spray back and forth a few times between the contacts.
|
Sorry for the delay in my response. Finally have some hours to put into to troubleshooting this deck. I was able to check the relays, and they are clicking away. My next idea is check the output of the audio head and if that is good, try and trace out the playback audio path from the audio circuit diagram. I will report back.