|
Thanks, everyone. I'm eager to get to it and sorry there will be a delay. Sadly, I've got to do these other household things while the weather allows.
We've had some family crises this year (including the passing of my father) that have prevented getting to several big household things. Thus, the restoration projects I've been really eager to do have been pushed even further back. I suspect many on this forum have similar troubles finding time. Hopefully, time will be available by spring.
Thanks dtvmcdonald for your tips and pointer to your CT-100 restoration in the Tech Forum. I'd not spent any time browsing that forum previously and was delighted to find all those details there.
Believe me, I'll be carefully compiling and reviewing every CT-100 restoration tip I can find before tackling the project and during the project. It will be terrific to have the benefit of all those prior experiences to know what to look for...and look out for.
Thanks to everyone who has taken the time to document their experiences. I will try to do the same when the time comes.
I also have a CTC-5 Deluxe Wingate, mostly restored by a previous owner, with a good 21AXP22, that I intend to go through stage by stage before tackling the CT-100. That should be a nice warm-up for what will almost certainly be much more of a challenge in the CT-100.
Watch for updates in springtime. Best to all until then.
-Bruce
|