Quote:
Originally Posted by etype2
Does it use one or two photo cells?
|
This , specifically from a disassembled xav-u50, has 2 photocells, masked as D901,D902 on Assembley board "N".
The other relavent masking on the board reads :
1-642-164-11
The reverse of that board other components with a soldered shield, which I have not removed. So no other information can be provided about now.
This xav-u50 definitely has caps swapped out, and they are in most of the places I have visually identified leakage on the xav-55n. I will provide photos as possible, and list the masking id's of the obviously replaced caps.
So far , the only difference between the 2 is the replaced caps, an extra power harness for the xav-55n, to facilitate use without diversity unit (I assume). There is also a small board on the bottom side of assembly board "B" on the XAV-U50, which I suspect was a service update. It is secured only with double sided tape, and manually soldered in.
