OK, good information. I have subbed the 6U10 prior, but no change. I may go ahead and pick up one of the dividers from Talon.
BTW, check out the waveform now, even after I "undid" my mods
PS I have the extra long driver!
Quote:
Originally Posted by zeno
Try a 6U10 if you havnt yet. There is a sleeve on the H hold
pull off & recenter into range.
Focus div just a pair of very high meg resistors, new p## is 800-616.
Dont see that doing it. Burns or bad focus.
Filter cans went but a PIA to get to. Need one of those 2 foot xcelite
drivers to pull chassis.Only good test for FBT is totally unload
it & ring it. If it has shorted turns usually you can also see distorted waveforms.
Other poss is one of the high ohm resistors has drifted up. Gotta
unhook one end to be sure, time consuming....
73 Zeno  |