|
I really don't mind using LEDs at all, they are cheaper than bulbs, and outlast them.
On second thought, since the source is 6.3v, and the drop across the transistor is pretty much nothing, w/o any bulbs, the switched on output should be about 6-7v so by adding a dropping resistor to ground, like 6-7 ohms should get me the 3.1v needed to use the ultra bright white LEDs, like I used in the GE TV.
Will just have to play till I find the right resistor value.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
|