|
Well yes I know a scope would be a big help and yes it’s frustrating seeking problems without it but as for the hv as I mentioned in an earlier post the problem was a bad ho tube and I even checked ohms on the horizontal hold coil which checked out perfect. And those circuits you mention all new caps and endless resistors checked perfect. This set is beginning to give me a headache lol. Even tubes keep checking them. Those metal shield’s in the IF section is it important to replace 3 solder connections to ground even though there are screw’s holding the shield in place to ground.
Last edited by timmy; 08-19-2022 at 10:52 AM.
|