Quote:
Originally Posted by timmy
Double check the transformer 148vac befor diodes. I guess it’s time to start cutting wires to the specific circuits the 275 145 190 and each one cut hopefully the problem shows itself.
|
That will achieve very little, if anything at all.
The moment you start to deny power to areas, sooner or later you will hit something critical, and cause horizontal sweep to shut down, and thus no HV, or vertical and raster, and w/o that, the power will spike.
There is just no way around it, you need a better DVM to measure current draw to see if you do indeed have too much draw.